Marine Waste Water Treatment Systems
With restrictions on discharge of waste water becoming a sensitive issue for Boat Owners, Governments and Environmental Departments, an Australian company, 'Marine Sewerage Systems (Aust) Pty Ltd', has designed and developed a treatment system to address the issues that are affecting the marine industry.
With over 30 years experience with domestic and commercial sewerage treatment systems, a great deal of expertise has been developed. This has provided a strong base for research and development of the marine sewage treatment.
Sizes Available
Constructed in polyethylene - this lightweight construction makes installation easier and less costly.

1200L x 1200W x 1200H
1200L x 700W x 1200H
1200L x 400W x 1200H

Results
As shown in the table below, the quality of effluent produced by the Ocean Kleen far exceeds the 'Grade A' Standard, with Ocean Kleen Fresh exceeding Advanced Secondary.
Grade 'A' Standard Requirements (mg/L) |
Ocean Kleen Salt (mg/L) |
Ocean Kleen Fresh (mg/L) |
|
BOD | 50.0 | 12.5 | 2.0 |
TSS | 100.0 | 31.0 | 5.0 |
cfu | 250.0 | 5.0 | 0.0 |
Ocean Kleen Fresh - Total Nitrogen: 7.5 mg/L Ocean Kleen Fresh - Total Phosphorous: 3.2 mg/L |
Design Features
- Polyethylene rotomoulded tank
- Easy to handle and lightweight
- Speed of installation
- Easily transportable
- Simple connections on site

Ocean Kleen fitted on deck of the Fraser Dawn

Ocean Kleen fitted on deck of the Kingfisher II
- Dept Health fully compliant
- High volume emergency storage
- Installation on or below deck
- Cost effective to run